Weekender Bag Sew Along - The Grand Finale!

Although I couldn't wait to just move along to the next side and get this thing DONE, one thing held me back:

See how the side pockets aren't even?  The strawberry is higher than the tulip, and although I tried talking myself into not caring, I care. 

So I ripped it out.  This was after I had already sewed it on with no less than 3 passes.  I fudged it a bit, and made the pockets match a little better before sewing it back together again:

I also broke my nail in the process :-(:

Then Pookie helped me mock up my 2nd side:

And I got that bad boy sewn on to get a finished Weekender exterior:

 

Unfortunately, my strawberry looks more like a tomato now, but whatevs :-/

So on to the sewing the lining together!  I did this much the same way I did the exterior:

I totally ignored the weird and fiddly-looking instructions about making a pocket for the stabilizer to put in the bottom of the bag...I couldn't picture it, and I was honestly too tired to figure it out.   Instead, I figured I could just do a false bottom.  So I just sewed the lining together, dropped it into the bag exterior, and then hand-stitched it around the zipper tape.  This was labor-intensive, and my fingers were sore from pushing through the layers of thick fabric/tape, but it fit together perfectly:

Then I made a false bottom by taking some cardboard and mocking up about how big I needed to make the bottom:

Then I used that template to cut out foam board (yes, the kind the kiddos use for presentations!  I got a big piece for a buck at the dollar store) and 2 pieces of lining fabric, which I cut about 1/2" larger than the board all around.  I ironed fusible fleece to the lining fabric for some extra padding:

I sewed the lining fabric pieces wrong sides together on 3 sides, leaving one short side open.  I flipped the whole thing inside-out so the right sides were now facing out, popped the piece of foam board in, folded the open edges down, and sewed them together.  My bottom ended up a smidge larger than my cardboard template, but it worked out just fine:

Voila!  A snug false bottom that isn't shifting anywhere, and which gives my bag a nice firm base:

And a shot of the interior, all sewn in:

I added some ribbons to the zipper pulls, and TA-DA!  My Weekender is finished!

 

And, I finished it in time for my trip to Playa Del Carmen!  I even made a little matching zipper bag out of the scraps:

I can't tell you how proud I am to have conquered this bag.  There are plenty of things I will do differently when I make another (oh yeah, there will be another!), and I'll summarize all that stuff in a future post.  Until then, I'm just going to bask in the glow of accomplishment! :-)

"Bonus Quilting", or "The Genius That is Leaders-Enders"

A while after I had started quilting, I started noticing that when I began sewing my piecing, usually when there was a seam at the start, the machine would "eat" my fabric and would bunch it all up and create all kinds of bird nest stuff on the back.  So not cool.  

In my internet travels, I learned about using a "Startie-Stoppie".  This was a scrap piece of fabric which you start sewing with, the "Startie".  Once that fabric goes through, you then chain piece your actual quilt top fabric afterward, and then run another scrap through, stopping your needle in the fabric until you're ready to sew again, the "Stoppie".  This means that any fabric-eating would happen for the scrap fabric, and not for your top fabric, because the thread was already properly tensioned for sewing once it got through the scrap. It also means that you could see any thread tension problems on the scrap before it hit your real project.  Lastly, it saves thread because you are only clipping the length between the chain-pieced pieces, not long tails. WIN-WIN-WIN!!

So I was happily Startie-Stoppie'ing along, clogging up scrap fabrics with thread and tossing them out when they were full.  Until I read THIS LIFE-CHANGING POST by that genius we all know and love, Lori Holt :-).  Go read it now...I'll wait :-)

OMG, right?!?  So basically, instead of using scrap fabric for your Startie-Stoppies, you plan ahead and actually piece another quilt between your main quilt project(s)!!!  Lori mentions fellow genius Bonnie Hunter's book on this subject called "Leaders and Enders", so check out Bonnie's blog "Quiltville" and click on her free patterns, and tutorials and everything else wonderful over there!  She is the queen of scrappy quilting.  I got her book, and it's brilliant!   

So, I planned a super-simple sampler quilt to try out this idea.  I busted out my Sizzix Big Kick machine, my 2 1/2" HST die, and cut up pieces of fabric I got from a Moda Scrap Bag.

This fabric is "Farmhouse" by Fig Tree & Co., and I paired it with Kona "Bone".  Nothing is simpler than HST's, right?  So I settled on a "Shoo-Fly", a 9-patch, a "Friendship Star", and a whirly-gig design that I don't the name of :-).  I think I'll just sew them all together diagonally (like in my colored lay-out in the pic below), but that's subject to change!

I keep all of my Bonus Quilt materials close-by and handy in a little basket next to my sewing machine.  I've been sewing them since December 2015, and they've helped me through 3 quilt tops now, as well as between the borders of my current "Bloom" blocks:

I didn't think to take pics until the heart baby quilt, so here's the Bonus Quilt in action:

Startie

Main quilt fabric

Stoppie

And as easy as that, I am now almost done with all of my blocks:

I'm still not 100% sure on the final layout, but I'll have fun playing around with options.  I bought some "Farmhouse" yardage to use as a border, so I'm excited to see how this one ends up.

In the spirit of full disclosure, this method obviously takes longer than just grabbing random scrap fabric for Startie-Stoppies because you're actually having to pre-plan, and you have to pay attention when actually making up your blocks.  But I think that little bit of extra effort to get a super-awesome bonus quilt is soooo worth it, don't you?

I've also heard of quilters working on multiple sections of their quilt top simultaneously with this method.  For example, if planning a 4-patch border, they would do those squares as Leaders-Enders, so when the main quilt top was done, the border would be done, or close to done, at the same time.  Quilters are so brilliant!